Safarifriends.org

' So now, how do I get to the new wenbsite?  Pete, '99 sahara, etc. From: "Safarifriends" To: "Safarifriends" Sent: Monday, December 9, 2019 11:42:39 AM Subject: Re: [Safarifriends] Test I’m still here On Dec 9, 2019, at 11:16 AM, Gary Bomkamp gbomkamp@... [Safarifriends] wrote: ...

'

Mel, or somebody, Could you please send me directions as to how to get on the new website? Sorry to be computer illiterate.    Nanandpete@...      Thanks, Pete ,'99 Sahara, 30''

'Pleas post the entire new signin process.  Thanks, Pete, '99 Sahara, 30', 3126 CAT, etc.
'

'Unfortunately the valve handles will fit on the valve body in any one of several positions and they probably are all different, at least mine were. They will pop off with the help of a screwdriver. You have to find the correct "on" position by trial and error, then reset the handle to the...

' I did not make it clear. There are actually 2 tubes going from the compressor to the front, one is1/4'' outside diameter and the other 1/8" outside diameter. I think the 1/4" supplies air to the tank but can't figure out what the other one is. Maybe it just goes back to the pressure swit...

'My friend has a '98 sahara-30' with a question. There is a 1/8" tube running from the top of the tank under the left front back to the compressor over the transmission. It also has a 1/4" tube running from the compressor  to the front and the one to the Pacbrake. My '99 sahara 30' does no...

' I had the same problem on my '99 sahara, 30'. To get to the waste valve I cut a 15" square hole in the underside right below the valve. Pretty easy to change the valve then. Have to be careful because there are all kinds of pipes in there. Just cut a small hole first so you can see what you a...

' Looks like you are getting plenty of help. Another thing to be careful of. The 4 big bolts that hole the shim pack are prone to galling. Be sure to clean the threads and WD40  them good. If you are going to use an air wrench  be very careful, maybe not a good idea.  If one of them galls up it is a...

' The compressor  operates the air horn , the Pac Brake , and the step cover if you have them. It should come on automatically when you start the vehicle and go off automatically by its self as it has a pressure switch. One hose should go directly to the Pac Brake and a 1/4" plastic tube toward...

' Sounds about like my 30' sahara was. You might consider taking 6 shims from the 3 corners and 9 from the other. Sounds like a lot but it should put you at 25 1/4" all around. That is still within specs and will let you sag a little in the next couple of years. Be sure you find the exact cente...