Search found 107 matches
- Wed Sep 18, 2024 10:55 pm
- Forum: Chassis
- Topic: Scary find on "J" adapters
- Replies: 2
- Views: 459
Re: Scary find on "J" adapters
It is, but I wanted to post this as a heads up/reminder to anyone that has stem adapters to check them from time to time. Mine were truly the "out of sight, out of mind" for the most part. I believe the weight of the TPMS sensors may have been the true culprits as they dropped down towards...
- Sun Sep 15, 2024 3:48 pm
- Forum: Chassis
- Topic: Scary find on "J" adapters
- Replies: 2
- Views: 459
Scary find on "J" adapters
I run centramatic wheel balancers, so in order to be able to put TPMS sensors on my rig, the tire shop put on the "J" stem adapters for me last year. This year I got disgusted with having to dig out my pancake compressor to air up my tires on the road so decided to upgrade to one of the ne...
- Sun Apr 28, 2024 7:38 pm
- Forum: Heating & Cooling
- Topic: Dometic Penguin AC
- Replies: 3
- Views: 3983
Re: Dometic Penguin AC
The previous owner of my rig took the original couch out and put a fold out sleeper in, and the place doing it had to modify the frame of the couch to be able to fit around the furnace since it's not moveable. The couch frame had to be cut and new box tubing welded in to fit around the furnace body,...
- Sat Mar 23, 2024 2:12 pm
- Forum: Electrical & Electronics
- Topic: Speedometer and Odometer acting like Tach
- Replies: 6
- Views: 5619
Re: Speedometer and Odometer acting like Tach
While you are working on the dash wiring, run a new ground for the gauges as well. I ran one from the front frame just for the gauges since they put everything in the dash on one ground point on my '96.
- Thu Mar 14, 2024 10:08 pm
- Forum: Miscellaneous Stuff
- Topic: Replacing Exterior Water Heater Door
- Replies: 2
- Views: 6133
Re: Replacing Exterior Water Heater Door
Replacing the bezel is time consuming since some of them have sealant under them, but it's not an impossible task. There are usually 2 screws that go into the body of the water heater that hold the bezel in place - remove the screws, then gently pry the old bezel away from the body of your rig. I fo...
- Thu Mar 14, 2024 10:04 pm
- Forum: Electrical & Electronics
- Topic: Allison trans / no start power
- Replies: 3
- Views: 4466
Re: Allison trans / no start power
You say new batteries - when whomever was in the process of removing the old terminals, did they mark them, or did they rely on color alone to know which wires went to which terminals? Sounds to me like at least one wire (small wire, not main battery ones) isn't connected to the proper terminal. If ...
- Tue Oct 03, 2023 10:31 pm
- Forum: Drivetrain
- Topic: Bizarre cold starting issue
- Replies: 1
- Views: 30003
Bizarre cold starting issue
This has happened twice now (2 years apart), both at the same campground with pretty much the same weather. Spent the night at Ely, Nevada (elevation about 6300 feet), and the temps dropped down below 40 degrees. Went to depart the next morning and the preheat would cycle on for about 2 seconds and ...
- Sun Sep 10, 2023 8:50 pm
- Forum: Everything Else
- Topic: Mileage and tank size - gauge malfunction
- Replies: 3
- Views: 19823
Re: Mileage and tank size - gauge malfunction
I've got a 96 30 foot with a 250hp Cat 3126, and not towing anything I can get close to 10mpg. Towing it goes down to about 8 - 8 1/2 (I do a steady 62 for my speed). As far as your tank, I'm thinking you have the same 90 gallon fuel tank that the vast majority of us have (you should be able to craw...
- Sun Sep 10, 2023 8:41 pm
- Forum: Drivetrain
- Topic: Changing trans fluid
- Replies: 4
- Views: 18895
Re: Changing trans fluid
As Brett stated, that is the reservoir for your power steering and brake booster. There are some files here about changing the transmission fluid and that you have to use the newer fluid now (Allison has a superb website that tells you which fluids can be used now)
- Thu Sep 07, 2023 11:33 am
- Forum: Coach Upgrades & Updates
- Topic: 1997 Cat 3126 300hp
- Replies: 5
- Views: 23397
Re: 1997 Cat 3126 300hp
There may be both under your dash (I know on my 96 there's both), but the one that you want for the scangauge is the round one (it may be zip tied above the steering column brace). I had issues trying to plug my scangauge cord into the plug under the dash - it will go perfect into the one in the mai...