Safarifriends.org

Instead of painting, is there a laminate(Formica-type) style that might be an alternative?
When my children were young, I covered the panel inserts with shelf liner. It saved a lot of wear and tear on me more so than the door finish.
I eventually replaced the glossy inserts with a matte finish panel.

Hello Bruce and Jenny The experience on dealing with LKL has been interesting. Their customer service is quick considering the global supply chain issues. The initial camera I received had IR emitters, and a sensor that detected ambient light, enabled the emitters as well as the cut-filter. Unfortun...

After using Zep(citrus degreaser), I'm now convinced that the Cummins is capable of pushing the Safari AND operating as a foam eductor.I was able to produce everything from stiff shaving-style foam to beautiful airborne bubbles.

Tnx, Mel, greatly appreciated. I've measured f/r. Front is 1.5", rear is 1.75". Checked the rear, and both bar-end bushings are missing on the d-side. I called PMW, they're out of SafaritMonaco parts, but the gentleman that answered was spot-on with the parts I needed...they've been out of...

Hi Mel
You're correct, it's off by a few degrees. I've not probed it, only checked with a tic(Flir) and thermo(Raytek), stopped, walk outside, tag the crankcase/block
, valve body/block, universals, tires, wet hubs.
Instrumentation(accuracy) is lacking.
I very much appreciate any guidance.

Hello Chuck. I wouldn't expect much from the dash air when ambient temperatures are much above 80F. My Sahara has the Acme 570-215 valve and Acme 4100173 H-bypass. My previous '93 Winnebago had the Acme 4100173 bypass. I too made the switch to ball valves on both coaches. There's only so much heat t...

Hi Mel Happy Tuesday. I do have a transmission oil temperature gage. It looks to be a factory install, as it has the "Safari" logo on face. I'm still digging through various vendors to see who offers a signal mux or an electronic hub will send both the EGT and boost signals the +35' over t...

My Sahara came with neither.
Did you install both/either??
Before(very accurate) or after(less accurate) the turbo?
Watching oil and water temperatures make me feel like I'm driving via the rear-view mirror.
On the flats, I'm not too worried, climbing the various passes has me sweating.

Hi Bob Another option is to call them, and ask if they'll cut-to-length. I ran into that with replacing the fuel filler hose. One vendor had a minimum length of 25', another sold it by the 3' stick(I needed 5')...I bought 2 sticks and a galvanized coupling. Compartment temperatures(heat), road debri...

I did find this site: https://www.suspension.com/universal-sw ... shings.asp
...and guidance on lube .vs. no-lube bushings.