Search found 5 matches
- Sun Mar 06, 2022 1:03 pm
- Forum: Chassis
- Topic: Removing inner rear wheels, diff seal
- Replies: 12
- Views: 25377
Re: Removing inner rear wheels, diff seal
The torque multiplier tool is the best. Got one on Amazon for $55. China of course but it does work great. Had to buy a socket for the large lug nuts. I think it was 42mm-1" drive. Didn't come with the tool set.
- Sun Mar 06, 2022 12:55 pm
- Forum: Electrical & Electronics
- Topic: Need to access radio and heater controls.
- Replies: 7
- Views: 15623
Re: Need to access radio and heater controls.
I looked under the dash with a mirror. I can see the left stud pointing down with looks like a 3/8" nut. I think if I pull out the vent panel from either side, disconnect the vent hose I'll be able to see the nuts easier. I'm too big to fit under the dash and my shoulders are toast so being abl...
- Sun Feb 27, 2022 11:35 am
- Forum: Electrical & Electronics
- Topic: Need to access radio and heater controls.
- Replies: 7
- Views: 15623
Need to access radio and heater controls.
I have a 98 Safari Sahara 3506. Trying to figure out how to pull the radio out and fix the heater control. What do I need to do to gain access to these items? The radio has a cassette adapter stuck in it. Won't pop out. The heater control has a bad a/c switch and the previous owner put in a rocker s...
- Mon Mar 08, 2021 7:03 pm
- Forum: Electrical & Electronics
- Topic: Generator issue
- Replies: 4
- Views: 3515
Re: Generator issue
I did put my kill-a-watt meter in the kitchen outlet and it is dead on at 120vac and 60 cycles. I forgot to mention that when the generator shuts down it sets a code. Code 36 I believe. Overspeed. I don't know why the unit worked perfectly on the saw horse . Idled down with no load and kept producin...
- Sun Mar 07, 2021 6:11 pm
- Forum: Electrical & Electronics
- Topic: Generator issue
- Replies: 4
- Views: 3515
Generator issue
I have a 1998 Safari Sahara 3506 that has a generator problem. Pulled it out. Not an easy task. Opened it up to find the magnetic rotor self destructed and took out the stator windings. Cleaned up all the magnet bits and replaced the rotor and stator. Also did maint. work while it was all apart. Oil...