Safarifriends.org

This is a project describing the selection and mounting of a floor based stand with arm to hold a notebook, tablet or laptop computer.

https://safaritoonces.org/safari-toonce ... -notebook/

This shows the replacement of the fuel lines and routing.

https://safaritoonces.org/safari-toonce ... -part-2-3/

This post is about finding the fuel problems that caused the CAT 3126B engine to falter, die, and then fail to start. Changes were made to the fuel system that highlighted a deterioration that had occurred in the fuel line from the main tank. This shows how the problem was diagnosed and corrected. h...

The plumbing under the kitchen sink was changed to allow for appliance storage: an Air Fryer, Instapot and toaster. Additionally a large drawer for canned foods was added under the sink. The first part of this project was described in the topic under Plumbing/Kitchen Sink and Slide Out. This second ...

Tom, beautiful fridge and installation. What I can never understand is how some people make a joke out of these fires. I see it on other forums as a witty clever comment. An RV in a fire due to an accident and someone will say must have been a fridge fire caused it, ha ha. We may not be able to chan...

Mel, map40

Yes that is the one... looks like I have to pull the wheel off sooner than later.

Thanks again.

I had the front wheel off to run new fuel line then put the front wheel back on, put the Jack and tools away and remembered there was a gasket between the hub and wheel that I had forgot to put on. What purpose does it serve? Is that to stop electrolysis between the alloy rim and steel hub? I'll put...

The grey water plumbing under the kitchen sink needlessly took up a lot of space. The abs plumbing parts are non-standard fittings, these were changed to common abs fittings found at any plumbing isle in a building supply store. Additionally the very heavy flexible drain pipe was changed to a more f...

This is before the line change out. The line is half full with a foam.

This may be air in the input fuel feed line from the tank. I had this and just changed out the lines. My 3126B would not run above 1,000 rpm I traced it to a breakdown in the fuel line. The line is under a vacuum. To see if this a problem insert a clear poly diesel line before the first filter. You ...