Safarifriends.org

Yes, you can just hook them up to the batteries using the correct charging parameters as your batteries, lead acid, AGM, Gel or Lithium as you have. However whichever charging system is attached to the batteries that is the least efficient that one will shut off when IT thinks it has charged to the ...

With my 840watts of solar and 600ah of new lithium batteries, as soon as I "top off" the batteries in the morning, I heat the hot water tank thru my inverter and 120volts and then I turn on the refer to 120volt electric for the next 1/2 of the day light hours. Ma Nature does me good and I ...

I would say it is all about the completed length and the fact that you replaced also the bushings for both sides otherwise you'd be walking with a short leg

I buy the Costco Michelin ones 24" $7.00. I remove the existing adaptor which leaves a thru hole and put the pantograph bolt thru it and the nut. ???

Regulator will then be on top of the gennie towards the left and a hose leading to the carb. As the fuel is already in a gaseous state it does not use the carb bowl. I did down load a manual by putting in the model and serial # complete with the "series" letter into a search engine (google...

You have lost the ground from the last light, closest light to the CO detector. CO detectors are put on the end of a run usually the lights. Pull down the closest light, CHECK the twisted mar connectors. test wires for continuity from the CO detector back to the light. Been there, done that!

Rudyman,
Use the shocks listed here on this post, UltraRV is going by the 2019 catalog from Koni and that has been wrong for years. This forum OWNS Safaris and has tried and true parts research. No one at UltraRV own a Safari

mine is next to the ignition solenoid by the fuse panels [img]

Yes the correct part https://www.fordpartsgiant.com/parts/fo ... 080-b.html and also https://www.fsrproducts.com/shopping/pr ... 71&c=13492

Typical functions of the relays are air compressor when ignition is on, Packbrake air solenoid if equipped and/or Kwikee step function to retract when engine is started. Auto reset CB is for power for the first relay (black wire seems to go there) possible air compressor relay. Cut off some zip ties...