Safarifriends.org

' Robert, One more piece of info for you. The +12 in and +12 out connections are connected to the normally open contacts of the relay on the board. When the circuit is operating properly, the relay is energized and those contacts are closed providing a path for the +12 to get to the Norcold main boa...

' Robert, I think the problem with this set up is the pressure in each tank. Propane is stored as a liquid in the tank and remains a liquid due to the pressure in the tank. When you remove propane from the upper part of the tank and reduce the pressure through a regulator, it flashes to a gas that c...

' Robert, I am talking about the orange wire connecting two pins in the black connector at the center of the board. That is the connection point for the thermocouple, one lead being yellow, the other red. I can see the yellow label and it should have a T/C label near the socket. Shorting this will n...

'Attachments : Robert, Attached is the instructions for installing the recall kit by a dealer in case you don't have it. Jim On 8/5/2019 2:11 PM, robert lewis robert.lewis.tl@... [Safarifriends] wrote:   Jim The jumper completed the circuit provided by the add on board. I am assuming that the thermo...

'Attachments : Robert, Yes the picture came through; that is how i knew you were talking about the Norcold recall. If you read your email that I responded to, nowhere did you mention Norcold; no one did or for that matter, where this mystery "red light" is located. When I saw your picture,...

' Joe, The pex and copper crimp rings or SS clamp band are the way to go. I would stay away from push in and lock type fittings as their approval is not as complete as the other two mentioned here. Jim Exler, Nampa, ID On 8/5/2019 5:25 AM, Joe Burch burch1945@... [Safarifriends] wrote:   I am in the...

' Robert, To put it mildly, "Norcold has had their way with you". A picture would have saved a lot of time. This is a Norcold recall fix that DOES NOT WORK for very long after it is installed and is non repairable. Around here the dealers will not touch it because Norcold won't pay much an...

' Craig, I can't believe what I am seeing. Does anyone see that the two heavy black wire ring lugs are on the solenoid terminals facing inward so they are quite possibly touching the case of the solenoid. In the picture, the upper one also appears that the crimp is opening possibly causing a poor co...

' Craig, The file you listed is "starter.xml" which is not a photo file. This file is for formatting the web page screen. Jim Exler On 8/3/2019 6:49 PM, Craig Burrell technolog1@... [Safarifriends] wrote:   ok i have replace the starter solenoid and i still have nothing. the solenoid have ...

' Craig, Unfortunately most of the answers you have received don't apply to your question about power TO the ignition switch; they address issues after the switch is on. I assume you have an Oshkosh chassis, not the Safari Magnum. I have limited data on that but it seems that the main battery cable ...