Page 1 of 1
ABS 1.5" fittings source
Posted: Fri Jan 17, 2020 11:49 pm
by Safaritoonces
I want to change the plumbing under my sink and need some standard angle fittings, street 22.5, 45, 90 for the RV standard which is different than for a house. The RV is much thinner walled and will not mate with standard house ABS 1.5".
Can anyone tell me a source please? I have searched but all the RV parts I found are just for large 3 or 4" filtings. Thanks
Re: ABS 1.5" fittings source
Posted: Sat Jan 18, 2020 10:23 am
by stuplich@ymail.com
Safaritoonces wrote: ↑Fri Jan 17, 2020 11:49 pm
I want to change the plumbing under my sink and need some standard angle fittings, street 22.5, 45, 90 for the RV standard which is different than for a house. The RV is much thinner walled and will not mate with standard house ABS 1.5".
Can anyone tell me a source please? I have searched but all the RV parts I found are just for large 3 or 4" filtings. Thanks
Robert and Bev Lewis
Try here:
https://www.plumbingsupply.com/absplasticfittings.html
or here:
http://www.discountmobilehomeparts.com/ ... ttings.htm
Re: ABS 1.5" fittings source
Posted: Sun Jan 19, 2020 6:36 pm
by Safaritoonces
Thanks for the link Mel. I looked and these appear to be standard 1 1/2" ABS house parts. I found the site for I think is the OEM fittings, they list that they make recreational plumbing for RV so I will call them tomorrow.
https://www.jb-products.com/
This is on one of the fittings. I am trying to route the dual sink drain lines to the rear into a Y then along the back wall to the drain. A trivial task with the normal fittings, but SMC used a thin wall version of the standard ABS fittings.
- 2000 Safari Continental plumbing trap manufacturer
- 20200117_185539.jpg (1.28 MiB) Viewed 9099 times