ABS 1.5" fittings source

Sinks, toilets, freshwater systems, waste systems, water heaters, holding tanks, distribution systems
Post Reply
Safaritoonces
Posts: 215
Joined: Sat Nov 02, 2019 9:51 am
Location: Bowen Island, BC
Contact:

ABS 1.5" fittings source

Post by Safaritoonces »

I want to change the plumbing under my sink and need some standard angle fittings, street 22.5, 45, 90 for the RV standard which is different than for a house. The RV is much thinner walled and will not mate with standard house ABS 1.5".

Can anyone tell me a source please? I have searched but all the RV parts I found are just for large 3 or 4" filtings. Thanks
Robert and Bev Lewis
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC

https://safaritoonces.org/
stuplich@ymail.com
Posts: 1146
Joined: Mon Oct 28, 2019 8:51 am

Re: ABS 1.5" fittings source

Post by stuplich@ymail.com »

Safaritoonces wrote: Fri Jan 17, 2020 11:49 pm I want to change the plumbing under my sink and need some standard angle fittings, street 22.5, 45, 90 for the RV standard which is different than for a house. The RV is much thinner walled and will not mate with standard house ABS 1.5".

Can anyone tell me a source please?
I have searched but all the RV parts I found are just for large 3 or 4" filtings. Thanks
Robert and Bev Lewis
Try here: https://www.plumbingsupply.com/absplasticfittings.html
or here: http://www.discountmobilehomeparts.com/ ... ttings.htm
Mel
'96 Sahara 3530, mine since '01
250 hp 3126 Cat, MD3060 Allison
Safaritoonces
Posts: 215
Joined: Sat Nov 02, 2019 9:51 am
Location: Bowen Island, BC
Contact:

Re: ABS 1.5" fittings source

Post by Safaritoonces »

Thanks for the link Mel. I looked and these appear to be standard 1 1/2" ABS house parts. I found the site for I think is the OEM fittings, they list that they make recreational plumbing for RV so I will call them tomorrow.

https://www.jb-products.com/

This is on one of the fittings. I am trying to route the dual sink drain lines to the rear into a Y then along the back wall to the drain. A trivial task with the normal fittings, but SMC used a thin wall version of the standard ABS fittings.
2000 Safari Continental plumbing trap manufacturer
2000 Safari Continental plumbing trap manufacturer
20200117_185539.jpg (1.28 MiB) Viewed 6174 times
Robert and Bev Lewis
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC

https://safaritoonces.org/
Post Reply