I need to pull the shower apart for better access to the ceiling.
I removed the shower door but need the top rail and two glass side panels removed as well. I removed all the inside screws and silicone around the top semi-circular rail but it still does not move up and I don't want to force it. Is there a way to get the top rail off and to remove the two glass side panels or is this even the correct sequence? There is a flat L shaped ring that runs around the top and bottom sills of the enclosure. It looks like it is pressed into place and I see no screws holding it. If these were removed I think the vertical rails might slide out sideways. But as I said I don't want to force anything and bend it. Any advice would be appreciated.
Thanks
Removing the shower stall
-
- Posts: 215
- Joined: Sat Nov 02, 2019 9:51 am
- Location: Bowen Island, BC
- Contact:
Removing the shower stall
- Attachments
-
- shower base ring
- base flat ring v1.jpg (129.67 KiB) Viewed 12974 times
-
- shower top ring
- top ring v1.jpg (123.75 KiB) Viewed 12974 times
-
- vertical stile and glass panel
- vertical and panel.jpg (131.11 KiB) Viewed 12974 times
Robert and Bev Lewis
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
-
- Posts: 215
- Joined: Sat Nov 02, 2019 9:51 am
- Location: Bowen Island, BC
- Contact:
Re: Removing the shower stall
Got it out, will post pictures and method later.
Robert and Bev Lewis
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/