Skin Corrosion

Skin, roof, windows, attachments, basement, etc.
Post Reply
JimBinMI
Posts: 13
Joined: Thu Jul 07, 2022 12:22 pm
Location: South Central Michigan

Skin Corrosion

Post by JimBinMI »

Has anyone had this problem?
If you did and repaired it, how difficult/expensive was it?
Thanks,
Jim B
2000 Safari Sahara 37' CAT One Slide
50FC9B23-9B9B-490C-84CE-81E6A4364645_1_105_c.jpeg
50FC9B23-9B9B-490C-84CE-81E6A4364645_1_105_c.jpeg (133.49 KiB) Viewed 8794 times
Attachments
A2FD6050-B7BE-434E-B0A4-42A07900B0C5_1_105_c.jpeg
A2FD6050-B7BE-434E-B0A4-42A07900B0C5_1_105_c.jpeg (186.79 KiB) Viewed 8794 times
RSBILLEDWARDS
Posts: 39
Joined: Sun Nov 03, 2019 8:10 am

Re: Skin Corrosion

Post by RSBILLEDWARDS »

That is as bad as I h ave ever seen it, ugly!
JimBinMI
Posts: 13
Joined: Thu Jul 07, 2022 12:22 pm
Location: South Central Michigan

Re: Skin Corrosion

Post by JimBinMI »

Do you have any info on repair?
stemo76
Posts: 37
Joined: Tue Mar 24, 2020 8:45 pm
Location: Everett, WA

Re: Skin Corrosion

Post by stemo76 »

RSBILLEDWARDS wrote: Sun Jul 10, 2022 6:39 pm That is as bad as I have ever seen it, ugly!
Mine is worse then that on the passenger side. Previous dealer skim coated it and and painted the RV, looked decent when we bought but started to fall apart within a year.

I think the only real fix is to remove all the aluminum on that side, replace the wood panels and have fiberglass product installed.
2000 Harney Renegade 38ft
Zanzibar Bill
Posts: 2
Joined: Tue Jul 19, 2022 7:26 pm

Re: Skin Corrosion

Post by Zanzibar Bill »

Mine was like this when i first bought it. First order of biz is to find out why it happened to stop further damage. Most likely water getting behind the panel. I didnt want to get into replacing the sides on mine because at the end of the day its over 20 years old and not worth it IMO.

Regardless of paint technique (or vinyl wrap) the corrosion needs to be removed and delamination needs to be somewhat "fixed". I used PL Premium extreme exterior adhessive to glue the wood and aluminum back together best I could. The big holes I filled with JB weld steel stick and skim coated with alumafill (which is a metal re-inforced bondo). Smaller issues i just skimed with the alumifill.

For painting i have tried a bunch of stuff. First I started by just repairing all the white sections, I then primed and installed a white vinyl wrap from amazon. 100% better than what I had but not perfect. I then tried spraying it and honestly was just too time consuming to mask it off correctly and i got very aggravted with overspray etc...

After alot of research on youtube I decided to give topside paint a try which is designed for boats. This option has worked great. Topside paint is easy to roll/brush on and you can tackle a few spots at a time after work etc.. My unit is white and blue and I found colors that are very close online.


Hopefully this helps. Im still not done 100 percent but it looks good from 20' :lol:
1999 Zanzibar White Tiger
JimBinMI
Posts: 13
Joined: Thu Jul 07, 2022 12:22 pm
Location: South Central Michigan

Re: Skin Corrosion

Post by JimBinMI »

Thank you for your response!
Post Reply