‘94 Serengeti Caliper/Pad Part Numbers (front/rear)

If you're not sure which forum to use, drop it here.
Post Reply
Black94Safari
Posts: 2
Joined: Tue Nov 16, 2021 12:51 pm

‘94 Serengeti Caliper/Pad Part Numbers (front/rear)

Post by Black94Safari »

Hello,

I am hoping to connect with someone who has replace calipers and pads on a Magnum Chasssis, Cummins Safari.

1994 and earlier is tricky 🥴

Please see pics below. Rear caliper casting is stamped 0578 Front caliper is Bendix 180401, I think...

Would appreciate any help.

Thanks!
Attachments
F7E22ED8-4CA3-4D46-9C7F-F9D0AFC00C2D.jpeg
F7E22ED8-4CA3-4D46-9C7F-F9D0AFC00C2D.jpeg (6.22 MiB) Viewed 358 times
00954CB9-1DA0-496A-9E14-96013279AB31.jpeg
00954CB9-1DA0-496A-9E14-96013279AB31.jpeg (2.33 MiB) Viewed 358 times
18A4D1FF-EDFD-4921-826D-2459949938F4.jpeg
18A4D1FF-EDFD-4921-826D-2459949938F4.jpeg (286.44 KiB) Viewed 358 times
52541E73-5DE0-488A-B265-76853C5357F9.jpeg
52541E73-5DE0-488A-B265-76853C5357F9.jpeg (4.15 MiB) Viewed 358 times
4102F67D-66E4-43A3-A453-27CB25D0E451.jpeg
4102F67D-66E4-43A3-A453-27CB25D0E451.jpeg (552.13 KiB) Viewed 358 times
32CD700C-A690-40FD-83D2-4F884F87B82A.jpeg
32CD700C-A690-40FD-83D2-4F884F87B82A.jpeg (1.31 MiB) Viewed 358 times
TDJohn
Posts: 313
Joined: Sun Oct 27, 2019 11:34 pm

Re: ‘94 Serengeti Caliper/Pad Part Numbers (front/rear)

Post by TDJohn »

I would suggest taking the calipers and pads to NAPA, they should be able to match the proper parts for you...
John
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
Lanie67
Posts: 1
Joined: Tue Nov 16, 2021 9:38 am

Re: ‘94 Serengeti Caliper/Pad Part Numbers (front/rear)

Post by Lanie67 »

I just did my 99 Serengeti NAPA didn’t have my parts I went to a truck and spring shop. Good luck
LeeTN
Posts: 8
Joined: Sun Oct 27, 2019 5:44 pm
Location: Eastern Georgia, USA

Re: ‘94 Serengeti Caliper/Pad Part Numbers (front/rear)

Post by LeeTN »

I did the fronts on my '93 Continental a few months ago and mine look very, very similar to yours... but not exact. Also, your hubs look IDENTICAL -- as do the disc. Soooo... you might try O'Reilly's and see if what they have will bolt-on to your caliper bracket. The bracket (from the one pic you posted) looks just like mine and the spring/retainer thing looks the same, too. O'Reilly's has free returns, so you can just take them back if they don't fit. Or take yours with you when you go and compare the bolt holes (where they mount on the bracket).

My rig has a Magnum Chassis decal on the back, but it's actually an Oshkosh chassis.

Here are the part numbers from O'Reilly's. If you're a veteran they give you 10% off, too!

Caliper:
97-17011D ($71.00)

Pads:
MKD184 ($54.99)


Lee
'93 Continental -- Oshkosh Chasssic -- 300 Cummins -- Don't they all have Allison six-speeds?
TDJohn
Posts: 313
Joined: Sun Oct 27, 2019 11:34 pm

Re: ‘94 Serengeti Caliper/Pad Part Numbers (front/rear)

Post by TDJohn »

Lee,

That is correct, '93 was the last year for the Oshkosh chassis, in '94 they started manufacturing their own Magnum chassis. As for Allison 6spd transmission, that got phased into RVs in '93. Even some of the low end Safaris in '93 still came with the Allison 4spd. So for most brands '93 model year was the transition year, after that point they were 6spd until some of the lighter duty Allison transmission started being utilized in the light wight class A RVs.
John
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
Black94Safari
Posts: 2
Joined: Tue Nov 16, 2021 12:51 pm

Re: ‘94 Serengeti Caliper/Pad Part Numbers (front/rear)

Post by Black94Safari »

Thanks a bunch. I found a list of pets from a previous post that was golden.
On to the Master Cylinder, Driver’s Tie Rod. All the while installing floor...
Hoping to get on the road before first snow...

Btw, anyone know what the Heater Valve p/n is??
Attachments
9FA5DDC2-5141-4717-83B0-8F178344FAA9.jpeg
9FA5DDC2-5141-4717-83B0-8F178344FAA9.jpeg (6.65 MiB) Viewed 260 times
714B61CC-734D-431C-8C4C-11809D18CACD.jpeg
714B61CC-734D-431C-8C4C-11809D18CACD.jpeg (4.66 MiB) Viewed 260 times
5B7AAAFC-055C-4BEB-B036-98443B953017.jpeg
5B7AAAFC-055C-4BEB-B036-98443B953017.jpeg (3.15 MiB) Viewed 260 times
390AE879-0C89-4153-95F3-FF7DA16ED00D.png
390AE879-0C89-4153-95F3-FF7DA16ED00D.png (2.55 MiB) Viewed 260 times
9C668036-3FBC-41FC-B9F8-7486933230F7.png
9C668036-3FBC-41FC-B9F8-7486933230F7.png (847.19 KiB) Viewed 260 times
19C734F2-BA8E-4534-8ADF-F267BCD02352.png
19C734F2-BA8E-4534-8ADF-F267BCD02352.png (1.03 MiB) Viewed 260 times
TDJohn
Posts: 313
Joined: Sun Oct 27, 2019 11:34 pm

Re: ‘94 Serengeti Caliper/Pad Part Numbers (front/rear)

Post by TDJohn »

Your brake master cylinder likely has a remote reservoir setup (brake fluid reservoir should be located in your front access panel by your fuse boxes). If that is the case, you need to make sure you order the proper master cylinder or otherwise you will be stuck with crawling under your coach each time you need to check you fluid.

Here is an outfit that builds master cylinders and Hydromax systems that our coaches use, I would give him a call. One of my fellow Safari owners just purchased the whole assembly from him as his electric motor on the hydromax conked out and so did the master cylinder, so he decided to change it as one unit. Good quality product that is make in America. Napa's master cylinders like most everyone else, is make in China, so you get what you pay for.

Here is a link to an actual remote reservoir cylinder he sells, so you know what it looks like.

https://www.powerbrakeservice.net/hymacywirere.html

Here is a second link to the same outfit, showing all sorts of different brake products he sells. He can custom build when needed. Not to many of those type of outfits left anymore...

https://www.powerbrakeservice.net/bosch-hydromax.html

If you can get a photo of the part number stamped on the side of the master cylinder that faces the frame that should give enough info to go on.

If you have more questions send me a PM
John
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
Post Reply