Page 1 of 1
Slide Gaskets
Posted: Wed Mar 25, 2020 10:03 am
by rsemko
Greetings, once again all,
I'm seeking info on the slide out gasket/seal.
My slide out seal/gasket is not sealing properly. After examining it I think it is not the original. Any information you may have on type, vendor, replacement information, etc. would be greatly appreciated. B
Thanks in advance for any and all help.
Hope all are staying well through this.
Ron Semko
1998 Ivory 4006
3126B 6 Spd Allison
Re: Slide Gaskets
Posted: Fri Mar 27, 2020 10:06 pm
by astrnmrtom
Re: Slide Gaskets
Posted: Sun Mar 29, 2020 6:26 pm
by rsemko
Thanks for the link Tom, much appreciated.
does your Serengeti have the original slide gasket/seals? If so would you please take a pic of them, I truly think my Ivory doe snot have the original slide gasket/seals, so I need to see what the original looks like.
Thanks,
Ron
1998 Ivory 4006
3126B 6 Spd Allison
Re: Slide Gaskets
Posted: Mon Mar 30, 2020 10:07 pm
by astrnmrtom
I'll see if I can get a couple photos tomorrow. My inner and outer gaskets are white and look like this:
https://www.rvupgradestore.com/White-Ru ... 3-1060.htm
Don't know if the dimensions match but they sound close.
Re: Slide Gaskets
Posted: Tue Mar 31, 2020 8:06 pm
by rsemko
Thank you for the link, and the coming pictures. They are very much appreciated.
Ron Semko
1998 4006 Ivory
3126B CAT 6 Spd Allison
Re: Slide Gaskets
Posted: Fri Apr 03, 2020 2:53 pm
by astrnmrtom
Here's photos of my inner and exterior slide seals.
- SafariInternalSlideSeal.jpg (155.13 KiB) Viewed 17679 times
- SafariExternalSlideSeal.jpg (172.61 KiB) Viewed 17679 times
Re: Slide Gaskets
Posted: Wed Apr 08, 2020 9:09 am
by rsemko
Tom,
Thank you so very much for your replies and sending the pictures. I truly appreciate it. I was right, the seals on my Ivory are not original. Now I can find the seals and replace with the proper ones.
Thanks again,
Ron Semko
1998 Ivory 4006
3126B CAT 6 Spd. Allison
Re: Slide Gaskets
Posted: Wed Apr 08, 2020 10:02 pm
by astrnmrtom
Great!
Glad to help. Good luck replacing your seals.