CAT 3126B oil pressure sensor manifold
-
- Posts: 215
- Joined: Sat Nov 02, 2019 9:51 am
- Location: Bowen Island, BC
- Contact:
CAT 3126B oil pressure sensor manifold
There are two oil pressure sensors on my 2000 Continental CAT 3126B. These are on the passenger side to the rear of the starter. I am considering to add a line to the manifold that these two sensors are on. But I can barely see one of the sensors. Has anyone changed these, how much work was it and did the starter have to be removed first?
I am adding an oil centrifuge and need an oil source and return port. What I am looking for is an oil feed line from the block (as per above or here) that will not impact any engine components. Can I T off the Bendix Truflow air compressor oil line and use oil from there without impacting the air compressor. There is a vertical plug on the drives side one inch from the bell housing that I am guessing would work for oil return to the pan. Does anyone have knowledge about this plug. I am working with Finning and this is not resolved as yet.
The two drivers side block files show the plug. The air compressor picture shows the oil feed line at the bottom of the compressor.
I am adding an oil centrifuge and need an oil source and return port. What I am looking for is an oil feed line from the block (as per above or here) that will not impact any engine components. Can I T off the Bendix Truflow air compressor oil line and use oil from there without impacting the air compressor. There is a vertical plug on the drives side one inch from the bell housing that I am guessing would work for oil return to the pan. Does anyone have knowledge about this plug. I am working with Finning and this is not resolved as yet.
The two drivers side block files show the plug. The air compressor picture shows the oil feed line at the bottom of the compressor.
- Attachments
-
- 20200812_171738.jpg (3.95 MiB) Viewed 6885 times
-
- 20200814_174810.jpg (3.5 MiB) Viewed 6885 times
-
- 20200814_174832.jpg (5.01 MiB) Viewed 6885 times
Robert and Bev Lewis
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
Re: CAT 3126B oil pressure sensor manifold
Robert,
Didn't you see my recent post regarding an oil leak???
Give Dave Atherton a call, he is the most knowledgeable CAT Master Trouble Shooter out there. If you have doubts, give Bill a call, he has dealt with him in person.
Didn't you see my recent post regarding an oil leak???
Give Dave Atherton a call, he is the most knowledgeable CAT Master Trouble Shooter out there. If you have doubts, give Bill a call, he has dealt with him in person.
John
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
-
- Posts: 215
- Joined: Sat Nov 02, 2019 9:51 am
- Location: Bowen Island, BC
- Contact:
Re: CAT 3126B oil pressure sensor manifold
John, I can't find your post on the oil leak. Can you tell me where to look please?
Robert and Bev Lewis
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
Re: CAT 3126B oil pressure sensor manifold
I left the info in this thread, but it is easiest to just type Atherton into the forum search bar, this will bring up Dave Atherton's info...Safaritoonces wrote: ↑Sat Aug 15, 2020 8:48 am John, I can't find your post on the oil leak. Can you tell me where to look please?
viewtopic.php?f=8&t=39867&p=224204&hili ... on#p224204
John
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
CAT 3126B oil pressure sensor manifold
91 Fox, running 5w30 weight oil in 95 degree heat. At Idle, oil pressure drops. Can I use 40 weight?? When it is cold, pressure is ok, driving a while in the heat, 30 minutes or so, then intermittently pressure drops, any ideas?
-
- Posts: 1146
- Joined: Mon Oct 28, 2019 8:51 am
Re: CAT 3126B oil pressure sensor manifold
DebrapieptDebrapiept wrote: ↑Wed Sep 30, 2020 9:45 am 91 Fox, running 5w30 weight oil in 95 degree heat. At Idle, oil pressure drops. Can I use 40 weight?? When it is cold, pressure is ok, driving a while in the heat, 30 minutes or so, then intermittently pressure drops, any ideas?
My 3126 Cat uses only SAE 15W40 oil.
Mel
'96 Sahara 3530, mine since '01
250 hp 3126 Cat, MD3060 Allison
'96 Sahara 3530, mine since '01
250 hp 3126 Cat, MD3060 Allison
-
- Posts: 215
- Joined: Sat Nov 02, 2019 9:51 am
- Location: Bowen Island, BC
- Contact:
Re: CAT 3126B oil pressure sensor manifold
What is a 91Fox? Which engine do you have?
Same as Mel, 15W-40... just changed oil in my CAT 3126B and bought the oil at CAT when buying other parts. Their recommendation, was 15w-40.
Same as Mel, 15W-40... just changed oil in my CAT 3126B and bought the oil at CAT when buying other parts. Their recommendation, was 15w-40.
Robert and Bev Lewis
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
2000 Safari Continental, since 2017
3126B Cat, 330hp
MD3060 Allison
Bowen Island, BC
https://safaritoonces.org/
Re: CAT 3126B oil pressure sensor manifold
How many quarts with filters change for CAT 3126B?
Kind regards,
Kind regards,
Chuck & Mitzi
'01 Safari Zanzibar 3646 (side entry)
Cat 3126B / Allison MD3060
Magnum M-Series "Blue Max" chassis
2016 Jeep Grand Cherokee Overland toad
'01 Safari Zanzibar 3646 (side entry)
Cat 3126B / Allison MD3060
Magnum M-Series "Blue Max" chassis
2016 Jeep Grand Cherokee Overland toad
Re: CAT 3126B oil pressure sensor manifold
Looked around for an answer. Seems like 15 with a shallow pan and 22 for deeper pan. While Googling, found this resource:
Diesel RV Club Forum
https://dieselrvclub.org/
Chuck & Mitzi
'01 Safari Zanzibar 3646 (side entry)
Cat 3126B / Allison MD3060
Magnum M-Series "Blue Max" chassis
2016 Jeep Grand Cherokee Overland toad
'01 Safari Zanzibar 3646 (side entry)
Cat 3126B / Allison MD3060
Magnum M-Series "Blue Max" chassis
2016 Jeep Grand Cherokee Overland toad
-
- Posts: 1146
- Joined: Mon Oct 28, 2019 8:51 am
Re: Oil Capacity (was: CAT 3126B oil pressure sensor manifold
chucksterchuckster wrote: ↑Sat Oct 03, 2020 8:23 amLooked around for an answer. Seems like 15 with a shallow pan and 22 for deeper pan. While Googling, found this resource:
Diesel RV Club Forum
https://dieselrvclub.org/
If "seems like" is not comforting, a call to the Caterpillar RV Hotline (877 777-3126) with your engine serial number will get you the correct oil capacity for your particular Cat engine.
(My 3126 is 28 quarts when changing the oil filter).
Last edited by stuplich@ymail.com on Sun Oct 04, 2020 1:07 pm, edited 1 time in total.
Mel
'96 Sahara 3530, mine since '01
250 hp 3126 Cat, MD3060 Allison
'96 Sahara 3530, mine since '01
250 hp 3126 Cat, MD3060 Allison