Page 1 of 1

‘94, 5.9 throttle cable

Posted: Wed Jun 23, 2021 8:47 am
by Jdviescad
I’m hopping someone has a photo or can take one of a 1994 Oshkosh 5.9 Cummins throttle assembly, spring, clamp, and cable connection to engine shaft.

Re:‘94, 5.9 throttle cable/P-Pump throttle linkage/cable

Posted: Sat Jan 29, 2022 2:12 pm
by TDJohn
Quote from your other post.
Jdviescad wrote: ↑Sat Jan 29, 2022 11:17 am
Does any of you have the Oshkosh chassis? If so, I’m looking for info on the throttle linkage at the P-Pump. Ours came apart on the road and I did a McGiver on it, it works ok but my cruise control no longer works. Photos would be great thanks


Jdviesced,

Here are some photos of the Bosch P-Pump throttle linkage, the photos are from an 8.3 Cummins on a Magnum chassis, but since the P-Pump is the same, the linkage is likely similar. Maybe someone else can post better photos.

Can you please confirm that you have an Oshkosh Chassis?
Most of the Safari coaches with the exception of Trek and a few odd balls, were built on the Magnum Chassis starting in 1994.

Top passenger side view of the cruise control cable and chain on '95 Safari with a Cummins 8.3L eng, and a Bosch P-Pump
Top passenger side view of the cruise control cable and chain on '95 Safari with a Cummins 8.3L eng, and a Bosch P-Pump
image000001(6).jpg (248.63 KiB) Viewed 1950 times
View of a Bosch P-Pump Throttle cable and linkage, camera lens pointing towards the rear of the coach.
View of a Bosch P-Pump Throttle cable and linkage, camera lens pointing towards the rear of the coach.
image000003(1).jpg (212.35 KiB) Viewed 1950 times