Can someone describe the process for relamping the front turn signals on a 1998 Safari Sahara 3044.
Are manuals for same reliably available?
Terry Shippee
1998 Safari Sahara 3044
Cat and Allison
Front turn signals
-
- Posts: 105
- Joined: Sun Oct 27, 2019 7:26 pm
- Location: Spokane, Washington
Re: Front turn signals
Terry,
I'm not sure what you are referring to when you are asking about "relamping" - are you talking about converting them over to LED fixtures? If so, what I did was to cut 2 pieces of aluminum down to fit into the recess that the original lights were set into, then mounted new LED fixtures onto those plates. The hardest part was making certain that I had the ground lead connected to the proper lead on the LED lights (mine had zero marking and zero information with them), so it was a matter of using a test light and checking the wires to make certain they were correctly wired.
I'm not sure what you are referring to when you are asking about "relamping" - are you talking about converting them over to LED fixtures? If so, what I did was to cut 2 pieces of aluminum down to fit into the recess that the original lights were set into, then mounted new LED fixtures onto those plates. The hardest part was making certain that I had the ground lead connected to the proper lead on the LED lights (mine had zero marking and zero information with them), so it was a matter of using a test light and checking the wires to make certain they were correctly wired.
- Attachments
-
- ft turn.jpg (148.42 KiB) Viewed 1790 times
Duane
96 Sahara 30', 250hp Cat 3126
Allison 6spd MD-3060
2015 Jeep Cherokee Trailhawk "Toad"
Spokane WA
96 Sahara 30', 250hp Cat 3126
Allison 6spd MD-3060
2015 Jeep Cherokee Trailhawk "Toad"
Spokane WA