Bogart TM-2030-RV programming
Posted: Wed Mar 16, 2022 4:21 pm
Good afternoon,
I have installed a TM - 2030 - RV in our RV at the same time as fitting 4 new 6V house batteries
My goal for the TM-2030 - RV is basic:
I would like it to sit on %full and when at 50% capacity sound the alarm in order to manually start the generator.
I have completed the install but are having some difficulty with the programming
The batteries read 12.55V when read across the terminals with a volt meter.
The monitor shows 10.8V
The %full shows 100 continuously even in the dark with all the lights on for five hours. It never moves off 100.
P9 is set at 50%
What have I missed in getting the Volts to show correctly?, why does the %full not drop? and how do I adjust the volume on the alarm (make it louder?)
Thank you,
I have installed a TM - 2030 - RV in our RV at the same time as fitting 4 new 6V house batteries
My goal for the TM-2030 - RV is basic:
I would like it to sit on %full and when at 50% capacity sound the alarm in order to manually start the generator.
I have completed the install but are having some difficulty with the programming
The batteries read 12.55V when read across the terminals with a volt meter.
The monitor shows 10.8V
The %full shows 100 continuously even in the dark with all the lights on for five hours. It never moves off 100.
P9 is set at 50%
What have I missed in getting the Volts to show correctly?, why does the %full not drop? and how do I adjust the volume on the alarm (make it louder?)
Thank you,