No start with key
Re: No start with key
I was having a problem with my key and no start but it was intermitten. I changed the ignition switch and thought it was good but it is doing it on current trip.
I will be checking wire's to see if I can find anything.
Also if I hold the key to start it will kick in sometimes.
I will be checking wire's to see if I can find anything.
Also if I hold the key to start it will kick in sometimes.
Bob
96 Serengeti 37'
3126 Cat
6 speed Allison
2011 jeep wrangler towd
96 Serengeti 37'
3126 Cat
6 speed Allison
2011 jeep wrangler towd
Re: No start with key
Bob,
There is a small starter solenoid somewhere near the area where the battery and service compartments are. That solenoid looks similar like the old mustang starter solenoids. It could be going bad or you could have some wire corrosion issues.
Have you tried to see if the issue can be replicated using the start button that is in the service bay compartment?
There is a small starter solenoid somewhere near the area where the battery and service compartments are. That solenoid looks similar like the old mustang starter solenoids. It could be going bad or you could have some wire corrosion issues.
Have you tried to see if the issue can be replicated using the start button that is in the service bay compartment?
John
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
Re: No start with key
Thanks John,
I havn't tried the button, might give it atry when we leave the S.P. we are in.Will do a little checking in engine compartment. I have checked what I could see under the dash.
I havn't tried the button, might give it atry when we leave the S.P. we are in.Will do a little checking in engine compartment. I have checked what I could see under the dash.
Bob
96 Serengeti 37'
3126 Cat
6 speed Allison
2011 jeep wrangler towd
96 Serengeti 37'
3126 Cat
6 speed Allison
2011 jeep wrangler towd
Re: No start with key
Bob,
If/when the problem comes back, check and see if the Allison shift pad is lit up during the starting issue.
If/when the problem comes back, check and see if the Allison shift pad is lit up during the starting issue.
John
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
-
- Posts: 1147
- Joined: Mon Oct 28, 2019 8:51 am
IGNITION SOLENOID (Was: No start with key)
in this pic the solenoid to the left of the flasher relay is my IGNITION SOLENOID.
Mel
'96 Sahara 3530, mine since '01
250 hp 3126 Cat, MD3060 Allison
'96 Sahara 3530, mine since '01
250 hp 3126 Cat, MD3060 Allison
Re: No start with key
I will keep an eye for it John, but I know the steps go in and normal lights on dashlight up. I guess I don't look at Allison pad.
Mel isn't that the solenoid to supply power toth fuse box?
Mel isn't that the solenoid to supply power toth fuse box?
Bob
96 Serengeti 37'
3126 Cat
6 speed Allison
2011 jeep wrangler towd
96 Serengeti 37'
3126 Cat
6 speed Allison
2011 jeep wrangler towd
Re: No start with key
Bob,
That solenoid that Mel posted does supply power to one of the fuse boxes, but only when the ignition gets turned on.
John
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
'95 Serengeti, Cummins C8.3-300
Allison 6spd.
-
- Posts: 28
- Joined: Sat Jun 26, 2021 12:43 am
- Location: Siletz Oregon
Re: No start with key
Well this just got interesting. I decedidec to replace the 3 way switch in the service bay. It is a 3 way 6 pole. I thought I could swap it with a 3 pole, when I turn the ignition to the ACC position, the engine would fire up. Problem is im sure the starter is still going as well. Gonna have to.order a 6 pole switch. Thinking thr switch may be bad and was stuck in the back position.
99' Safari Continental Panther 425
Cat C12
Cat C12
Re: No start with key
It was the solenoid,replaced it with this one. It is the same one I used when I replaced the front solenoid.
It was on the wall at foot of bed
It was on the wall at foot of bed
Bob
96 Serengeti 37'
3126 Cat
6 speed Allison
2011 jeep wrangler towd
96 Serengeti 37'
3126 Cat
6 speed Allison
2011 jeep wrangler towd
-
- Posts: 19
- Joined: Tue Oct 19, 2021 9:27 am
Re: No start with key
I had a similar issue. No start with key but would start in service bay. I fixed my issue by cleaning and squeezing clips to tighten some fuses that are right above the batteries. They are barrel like fuses between two spring clips. The are four of them in a row with no markings. It was easy so it might be worth taking a look.